Installing a Flexible Liner is easy... Liners are shipped folded or rolled for ease in handling. In most cases, personnel totally unfamiliar with flexible liners can install them in a few hours. Many liners are installed in minutes. Forget sandblasting or other expensive tank preparation. Just remove sharp projections, sweep clean and drop liner in. |
 |
OPEN TOP TANK - with open top liners
 1. Place liner in bottom of tank. |
 2. Locate top edge of liner and pull toward sides of tank and up to top of tank. |
 3. Secure in selected manner. |
CLOSED TOP TANK - with open or closed top liners
 1. Unroll liner with top edge up and feed through manway. |
 2. Unfold liner and pull toward sides of tank. 3. Prepare top edge of liner as required. (If liner is closed top, prepare attachments to additional supports on top surface of liner.) |
 4. Raise to top of tank and secure in selected manner. |
Horizontal (cylindrical) tanks - flexible PVC liners can also be made for these types of tanks and supported internally by means of a rigid PVC pipe rib cage. Contact Specialty Plastic Fabricators, Inc. for further information on liners for these types of tanks.